Don t Believe In These "Trends" About Replacing A Window Handle

Tips For Replacing a Window Handle

Switching the handle on your window is a simple task that can be accomplished in the at-home comforts of your home. Use these helpful tips to ensure an easy operation and a beautiful looking finish.

Begin by removing the screw covers to expose the screws inside the uPVC window handle. Make sure you measure the spindle in order to make sure you are getting the correct size replacement upvc window handles.

1. Measure the Spindle Length

It's important that you have the right size spindle when replacing a window handle. This is because it will affect how tight or loose the handle is and whether it locks correctly inside the frame of the window. The spindle is a metal shaft that connects to the handle as well as the lock inside the window frame. The spindle can be found in the standard 8mm industry cross-section or older versions of 9mm. Modern industry standards are 8mm but it wasn't always the case. It is crucial to confirm the measurements before purchasing the handle you want to purchase.

Take the handle off. This is easily done by turning the handle into the open position, and unscrewing two screws that keep the handle in place (which are usually concealed behind plastic caps that must be removed). Once removed you can measure from the base of the handle to the end of the spindle. This will provide you with the measurements needed to buy a replacement.

There are plenty of choices when it comes to selecting the right window handle from sleek chrome that fits in with a modern home, to traditional burnished brass that looks wonderful in restored Georgian rooms, or even the more traditional Tudor cottages with curved monkey tail latches! The options are endless but the most important thing to do is choose a style that complements your home.

Espag handles are commonly installed to uPVC window frames and are always the same size, with a 43mm centre. Cockspur handles are available in a variety of sizes, ranging from 58mm to 62mm. Cadenza window handles are a different size again because they feature an angled blade that operates a multi-point locking window handle mechanism inside the window.

When choosing a window handle, you should also consider the hand you use to open your external door handles. Inline espag window handles are not hand-operated and can be used on either left or right handed windows. Cranked window handles are only used with windows that open in one direction.

2. Take the handle off

Whether the handle is damaged or simply worn out, a window handle that falls off is a major source of frustration. However, the good part is that replacing the uPVC window handle is a straightforward task that you can complete yourself. You will require only the most basic hand tools and some time to complete this process.

You will need to first open the window and ensure that it is not locked. Then, take off the screw caps holding the handle in position. Once these caps are removed, you can begin working on the removal of the handle itself.

The handle is attached to a spindle within the window frame. Depending on the kind it is held in place either by a screw or a pin. The most common handles are the inline Espagnolette and the cockspur handles. Both types of handles are available on casement windows including aluminium ones. You can lock the handles with a key to prevent unauthorised access from the outside. Or you can lock the handles by turning them clockwise.

To remove the handle you'll need a flat blade screwdriver to loosen the clip that holds the handle in place. After this is released, the handle will slide off the spindle. Once the old handle has been removed, you'll need measure the spindle length and make sure that the new handle will fit.

Once you have the correct size, you are able to fix the new handle into place. It is important to ensure that the handle is properly attached and that it is rotating in the proper direction (clockwise in the case of an open or counterclockwise if the handle closes). It is crucial to make sure that the handle has not been placed upside down.

Then, you must replace the screw cap caps. After you've done this you can test the handle to ensure that it functions correctly. You can also test the locking system by moving the handle from an unlocked position to the locked position and back.

3. Remove the Screws

A uPVC window handle is an integral component of every home and is usually the first thing to begin to show signs of wear and tear or damage. It can be caused by natural causes or from regular use and sometimes even intentional damage caused by criminals who may seek to open a closed window and gain access to your property. A simple replacement can solve the problem and prevent it from happening again.

UPVC handles may also be difficult to open if the locking mechanism isn't working properly. In most cases, the issue is solved by replacing the multipoint lock rather than the entire handle and it's definitely worth a look because it could save you money.

After you've removed the old handle you'll need to remove the screws that were that held it in place. They're usually on the inside face of the base. It is possible to use a screwdriver do this. Be careful not to over tighten the handle since this could cause it to loosen.

The next step is to find the fixing screws or pins that hold the new handle in place. These are likely to be located on the inside face of the handle base and you'll need a screwdriver or a pair of pliers in order to remove them. If you want to replace them, you should replace the caps on the screw and check the handle to ensure it works properly.

Install the handle by aligning the spindle to the cutout in the window mechanism. Then screw it in. If you want to replace the screw covers make sure that the handle is in a position that is open and any screws are securely fixed. It's done! You can enjoy the new window handle. We hope this will allow you to avoid having to pay for costly window and door handles victorian replacement upvc door handle services in the future. If you would like assistance with this or any other aspect of your uPVC windows do not hesitate to contact us.

4. Fit the New Handle

Whether you're replacing a broken handle or simply changing it the process is easy and can be accomplished in just a few steps. The key is to identify the type of handle, determine its spindle and know what tools you'll need to complete the task. Always consider the safety of your windows and tools. It's also important to take your time and follow the steps with care to ensure you have a working handle that is safe to use.

The first step is to find the screws that hold your current window handle and remove these, whilst keeping an adequate grip on the handle itself to stop it from falling and causing injury. Once the screws have been removed, you can put them in a safe place to be replaced in the future.

Once the Old Aluminium Window Handles handle is removed, you are now able to begin to install your new handle. The handle must be a perfect fit for it to function properly and hold the window in its closed position. Next you need to slide the metal bar that is square on the handle into the hole for the window mechanism.

Now that the new handle is in place, the final thing to do is to replace the caps on the screws and verify that it works. If you aren't satisfied with the result or if the window doesn't open and close as it should the next step is to call our experts who will be able to assist you.

Almost all UK homes have uPVC Windows. As such, many will need to be changed at some point due to wear and tear or breakage. Anyone with a little DIY expertise can complete the task. It is essential that the handle you select is in line with the style and size of your window. Contact our team if you aren't sure of the kind of handle that you need. They'll be able to guide you through all the options.