15 Reasons To Not Ignore Fiat 500 Replacement Key Cost

fiat 124 spider key fob not working 500 Replacement Key Fob

It could be time to replace the battery if your 500 remote key fob is not working. If you replace the battery, but it doesn't work the issue could be elsewhere.

At United Locksmith, we specialize in the creation of new keys for old automobiles. We have all of the tools and accessories needed for this type of service.

Dead Coin Battery

The most common reason your Fiat 500 key fob will not unlock or lock the doors is due to a dead battery. The battery of the coin cell inside the key fob will drain quickly when you don't use frequently enough. If your remote started to show signs of weakness like a loss of range and then completely stopped working the battery could be dead.

The battery in the key fob is held in place by steel clips for retaining. If the clips are loose it could lead to contact issues that will stop the remote from receiving power. Use a flathead screwdriver to pry open the retaining clip and remove the battery. Be sure to use a replacement with the same kind of voltage, the same size and specifications as the original battery.

The key fob can be damaged or corroded through exposure to water. Even a quick bath in warm, soapy water can cause damage to the chip. It's best to keep your key fob in a dry place.

Water Damage

If your key fob isn't working properly, it may be caused by water damage. Key fobs are fitted with rubber seals that stop them from being damaged by rain or fobik a splash of water, however it is crucial to keep your car keys from being tossed into the pool, ocean and washing machine!

The key fob is equipped with an electronic chip inside that sends a signal car's immobilizer system. The chip allows the 500 to lock and start. If it gets wet, it will no longer function.

If you're looking to determine if your key fob is functional it is possible to clean the internal electronics with isopropyl or an electronic cleaner. It is recommended to replace a key fob in the event that it is submerged in salt water instead of trying to repair it yourself.

A replacement fob might cost you some money however, it's cheaper than having to have your Fiat 500 towed to a dealership and repaired there! Plus, you can do it yourself in several easy steps. Make sure you have the correct battery type prior to opening your keyfob. This is a job that's much simpler than it appears, and you can find step-bystep instructions online for virtually any key fob for cars.

Faulty Chip

The chip that is contained in the key fob communicates to your car's immobiliser unit to ensure the car is able to start when the correct key is used. If the chip is damaged or destroyed, your car won't start regardless of what you do.

Damage to the water or a dead phone battery are among the most frequent causes of defective chips. It is best to leave the repair to a professional locksmith who will be able to replace the chip in a short time and at a an affordable cost.

If your key fob stops functioning after exposure to clean water from the tap or rain, take out the battery and wipe down the electronic component with a tissue to ensure it's completely dry before putting it back in. If the key fob does not function, there is the possibility that it's malfunctioning components and need to be replaced.

Some people will turn to their dealer when in need of a new Fiat key fob, however this is a expensive option. If you're seeking a cost-effective method to have your Fiat key fob fixed make sure you contact United Locksmith. We have the equipment and know-how to get a new fiat 500 key to repair your fiat key programmer fob in a timely and professional way.

Faulty Receiver Module

fiat 500 replacement key cost uk key fobs transmit signals up 50 feet away to the vehicle, which will unlock and lock the doors (and start the vehicle for those with automatic transmissions). There are a variety of reasons why the fob might not function. This includes a dead battery or water damage, worn out buttons an issue with the receiver, signal interference, or malfunctioning chips.

If the fob was placed in a pocket that suffered a severe trauma, like falling on hard floor or being washed in a washer the fob may not be able to communicate with the car's Body Control Module (BCM). The BCM is a security system which will only accept signals from genuine keys.

If this is the case, then you must replace your fob. A professional locksmith can handle every aspect of the key replacement process and even program a new one for the 500. In fact, they could offer you a clone key that functions exactly the same way as the original fob (and costs only a fraction of the price).